Alfa Laval BaseLine is a competitive range of gasketed plate-and-frame heat exchangers for simpler dairy, food, beverage, pharma and other hygienic and utiility applications. ClipLine series Alfa Laval ClipLine range is used in the same hygienic applications
Oct 03, 2019 · Abstract. The overall heat transfer coefficient, pressure drop, and the fouling thermal resistance were compared between a clean and a seawater-exposed, fouled plate-frame heat exchanger. The fouled heat exchanger was utilized for heat recovery from the seawater-effluent for 3 months at a powerplant site. The performance tests were conducted at temperatures of 20 °C and 30 °C on the fouled-side,
HUBER Solution for Heat Recovery from the Wastewater The temperature level of wastewater heat is rather moderate, but the heat is permanently available on each sewage treatment plant. We use a heat pump to raise the temperature up to a level that enables the reliable and efficient use of this thermal energy for low-temperature sludge drying. The heat pump generates 4 to 6 kWh useful heat.
Mar 27, 2018 · Plate and Frame Heat Exchangers This type of heat exchanger consists of a series of embossed or corrugated stainless steel plates with gaskets between them, stacked together in such a way that one fluid goes through alternate spaces between plates, while the second fluid goes through the remaining alternate spaces. The fluids are distributed and collected at ports in each corner of the plates.
Industrial wastewater treatment, methanization heat The operator of a wastewater treatment plant can save money by recovering heat from the raw effluents before discharge (even below 30°C). Barriquand offers a choice of plate exchangers for treated effluents according to the thermal program, the nature of the fluids, and the space available.
Warm process water can be used to heat cold fresh water. This helps to optimize the temperatures of the water streams and reduce the energy demand of the wastewater treatment. The EPlate heat exchanger from DAS Environmental Expert GmbH uses double-wall plates (thermal plates), which are always kept clean with a simple cleaning system.
Plate Heat Exchanger Unit Waste heat recovery system A copper brazed plate heat exchanger can be used for all conventional applications. Nickel brazed plate heat exchangers can be used for the application of distilled water or other more aggressive fluids. Brazed plate heat exchangers can be used up to a temperature of 200 °C and can withstand a maximum operating pressure of up to 39 bar.
The use of PPFF leads to higher heat transfer coefficients due to the combination of plate pattern and thickness which is based on 40 years of proprietary manufacturing technology. The PPFF system incorporates a patented distribution system, which provides greater control of fluid distribution and wetting of the surface as well as turbulent
Energy Recovery from Wastewater DASOur self-cleaning heat exchanger EPlate enables wastewater heated during the process to be used to heat cold fresh water. This helps to optimize the temperatures of the water flows and to increase the energy efficiency of the wastewater treatment plant.
In conclusion, spiral heat exchangers have been shown to be eco-nomical and reliable for handling municipal wastewater treatment plant sludge heating duties. These exchangers are able to operate reliably when fed with solid and fiber laden fluids, such as sewage sludge. Plate heat exchangers provide an economical option for
Proud to be serving the Machining Platform you can trust