Creare delivered a heat exchanger that was installed to recover waste heat from the exhaust gas of a RR-250 gas turbine engine. Water circulating through a loop picked up the waste heat from the exhaust gas heat exchanger and delivered the heat to an Electratherm Power+ Generator that produced almost 50 kW of electrical power.
Functionality of heat recovery from flue gas. An flue gas heat exchanger reduces the temperatures in the flue gas flow. The resulting energy can be reused almost loss-free with a high degree of efficiency. The possibilities are not only limited to the use for heating or the heating of domestic hot water.
Waste Heat Recovery Systems - Bionomic Ind
Flue gas heat exchanger for steam boilers - BoschThe effective use of the recovered waste heat allows for fuel savings of up to 7%. Combined with the use of condensing technology, the savings potential is increased by an additional 7%. Thanks to the significantly lower fuel costs, the flue gas heat exchanger usually amortises within a short time.
Waste heat recovery from Flue gas. A significant reduction in CO2 emissions, energy consumption and operational costs is possible with waste heat recovery from flue gas and exhaust air. Extract more heat from your flue. Heat exchanger applications for Thermal Processes. Advanced industrial heat
Waste heat recovery technologies and applications Jun 01, 2018 · Waste heat recovery methods include capturing and transferring the waste heat from a process with a gas or liquid back to the system as an extra energy source. The energy source can be used to create additional heat or to generate electrical and mechanical power.
To be able to use the flue gases nevertheless, a flue gas heat exchanger can be used to heat the heating medium. This means that the heat is no longer lost, but used to generate energy, without any additional consumption or costs. The flue gases, which can reach temperatures of up to 1200°C, are cooled down to around 30 to 60°C.
About HMG · Articles · Contact · Corrosive Flue Gas is No Longer a Show-Stopper for Heat Recovery
Research On Waste Heat Recovery Of Low Temperature heat from thermal process for power generation.Y. et al. (2017) used multi-stage flue gas cooler to recover waste heat boiler of power plant, analyzed the deep utilization of flue gas waste heat, and proved that the unit has significant economic benefits in heating period and non heating period. The development and research on the
Proud to be serving the Machining Platform you can trust