The aim of this paper is to calculate the Heat transfer coefficient, pressure drop and heat load of refrigerants in Air-cooled Fin and Tube heat exchanger. Here FTHE is used as a condenser in one
capacity and cycling mode tests. The condenser fan is the axial AC type with air delivery (600/665) cfm, at rated speed of (1400-1600) rpm. The operation temperature is in the range of (-10 to +70)°C. 2.2. Condenser Geometry The test condenser is shown in figure 3. It is a finned tube heat exchanger, air cooled condenser. The physical
AIR COOLED HEAT EXCHANGERAIR COOLED HEAT EXCHANGER 12 AIR COOLED HEAT EXCHANGER Air Cooled Condenser (ACC) is a direct air cooling system where the steam is condensed inside finned tubes, and the cooling media air is blowing outside the fin tube. ACC is made of modules arranged in parallel rows. Each module contains a number of fin tube bundles. An axial flow, forced
Aug 22, 2018 · FNV Type Condenser can convert gas or vapor into liquid and transfer the heat from tube to air near the tube in a very fast way. The cold room condenser working process is an exothermic process, so the FNV type condenser temperature is higher. The power plant uses a lot of condensers to condenses the steam from the turbine.
Heat Exchangers - MOHIBRFinned tube heat exchanger for heat transfer between air, gas and liquids or steam. The fin tube heat exchangers are designed to transfer heat from clean air and gases with high efficiency on liquids or vapors, and vice versa. In this way the media can be heated, cooled or condensed, in a closely space.
1Applied range:Air-cooling condenser belong to heat exchanger, which do not need the cooling water, but use the air to condense the refrigerants. According to the actual needs, air-cooled condenser is divided into natural cooling and powerful cooling. Natural cooling is mainly used in small refrigeration equipment ,such as air conditioning.
Proud to be serving the Machining Platform you can trust