90/10 Copper Nickel Plate is also known as 90/10 cupro nickel plate. CuNi 90/10 Plate has a Thermal Conductivity of 32.9 W/mK (0.0900 BTU in/hr.ft². °F). The Thermal Expansion Co-efficient of UNS C70600 Foil (@20-300°C/68-572°F) is 9.00 µin/in °F (16.2 µm/m °C).
C70600 (C706) & C71500 (C715), 90/10 Copper Nickel Sheet, with an official alloy designation of UNS C70600, has a nominal chemical composition of 10% nickel, 1.4% iron, and 88.6% copper.Cuni 90/10 Sheet (C70600, CW352H), an alloy with 90% copper and 10% nickel, is the most commonly used alloy.Cuni 90/10 Coil (C70600) can be found in naval and commercial shipping, offshore oil and gas
90/10 CuNi Specifications Properties Chemical 90/10 CuNi 90-10 cu-ni 90 10 cu ni C706 C70600 CA 706 CDA 706 CuNi 90/10 Copper Alloy UNS C70600 Copper Nickel 10% Copper Nickel 706 Cupro Nickel 90/10 Cupronickel CuNi10Fe:Bar:ASTM B122, ASTM B151, MIL-C-15726F; Pipe, Seamless:ASME SB466, ASTM B466, MIL-T-16420K; Pipe, Welded:ASME SB467, ASTM B467, ASTM B608, MIL-T-16420K
Sunflex Metal are leading Copper Nickel Sheet suppliers in India. Copper Nickel Plate and Foil chemical composition is 8.5 to 45% Ni, but so as to improve their specific properties, almost all commercial alloys of Copper Nickel Coil, also contain tin, iron and manganese. The Molecular Formula of
Copper-Nickel:Welding and joining plate, sheet and pipeA 90-10 Cu-Ni bare filler metal and a covered electrode is available in Europe and occasionally used, but the bare wire is generally limited to gas tungsten arc welding (GTAW) gages up to 0.125-in. (3-mm) thick. Welds made with 90-10 Cu-Ni fillers should be limited to non-wetting surfaces since the weld may be anodic to the base metal.
Cupro Nickel 90 / 10 Sheets and Cupro Nickel 90 /10 Sheets. These Copper Nickel 90 /10 Sheets (UNS C70600) is used in the manufacturing of heat exchangers, pressure vessels, marine parts, and other machinery in the chemical industry. Copper Nickel 90 /10 Plates are a robust, flexible material displaying excellent corrosion resistance.
Copper Nickel Plate and Cuni 90/10 Sheet/ UNS C70600 The hot working capacity of Copper Nickel 90/10 Plate is good with the recommended hot working temperature ranging between 760 and 816°C. Cuni 90/10 Sheet annealing temperature is between 593 and 816°C. It is primarily used for seawater service as machined and forged valve and pump components, fittings and hardware.
May 19, 2017 · C70600 90/10 Copper Nickel. 90/10 Cupro-Nickel is a copper-nickel alloy that shows good resistant to stress corrosion. Due to the addition of small amounts of iron and manganese, C706 CuNi is often used when an application will involve high-velocity. seawater. 90-10 Copper-nickel demonstrates good hot and cold working properties and is readily
Proud to be serving the Machining Platform you can trust