Cryogenic Safety Valve Approved by ASME Ce PED

Safety Relief Valves - Tom Parker

These valves meet important international standards which include:BS 6759 Parts 2 & 3, AD-Merkblatt A2, ISO 4126 and ASME Section VIII design codes as well as type test approvals from TÜV and the National Board. The products comply with the requirements of the European Pressure Equipment Directive (PED) and are available with both the CE Safety Valve Codes & Standards Flowstar (UK) Limited

• Europe

  Type 06416 - Safety valve and valves for LNG, cryogenic

  CRYOGENIC. Type 06416. Cryogenic Safety Valves, angle type, bronze, PN40, type tested TÜV-SV.780. S/G. Standard safety valve (0.2 - 25.0/40.0 bar). ASME certification only for d010.5. Metal to metal seated, closed bonnet, with lifting device "cleaned Type 06478 - Safety valve and valves for LNG, cryogenic CRYOGENIC. Type 06478. Cryogenic Safety Valves, angle type, bronze, PN63, type tested TÜV-SV.836. S/G. Standard safety valve, with carbon filled PTFE valve seal, closed bonnet, with lifting device Outlet:female thread G 1/2 acc. to ISO 228/1 "cleaned and

  Cryogenic Pressure Safety - uspas.fnal.gov

  Cryogenic Pressure Safety with Emphasis on Overpressure Protection of Low Temperature Helium Vessels valves CSA, Feb 2018 Cryogenic Pressure Safety, Part 1, Tom Peterson 6. Over Pressurization or explosion due to rapid expansion Note that the scopes of the ASME BPVC and PED version 2014/68/EU codes differ