ANSI B16.5 CLASS 300 FLANGES Welding Neck RF Socket Welding RF Size Outside Diam. Bore Diameter STD Bore Diameter XS Thick-ness Socket Depth Total Thick-ness Diam. at Base of Hub Holes Raised Face Net Diam. No. P.C.D Outside Weight Diam. Thick-ness mm inch D B2 B1 B2 B1 t Y T2 X h n K G f kg 15 20 25 32 40 1
ANSI B16.5 Class 300 Welding Neck Flanges On Coastal FlangeANSI B16.5 Class 300 Welding Neck Flanges. Email This Page Download PDF. Download PDF. Printable Page. 1. Close Window. All dimensions are in inches. These flanges will be furnished with a 1/16" raised face unless otherwise specified. Flat face option available.
ASME B16.5 ASTM A182 F53 LWNRF Flange 1 Inch CL300. A182 F904L WNRF Flange DN32 SCH40S CL150:1:Material:Stainless Steel:such as 304, 304L, 316, 316L, 321 ,904L. Weld neck flange is a type of pipe flange that incorporates a cast-in neck that is welded to the pipe. Unlike a plain flange that is slipped over the pipe prior to being
ASME B16.5 ASTM B564 Hastelloy C276 Welding Neck ASME B16.5 ASTM B564 Hastelloy C276 Welding Neck Flange Tongue and Groove 1. Material:Hastelloy C276 (UNS N10276) 2. Size:1-1/4 Inch (DN32) 3. Standard:ASME B16.5. 4. Type:Welding Neck Flange Tongue and Groove. 5. Pressure:2500LBS. Tongue-and-Groove (T and G) The Tongue and Groove faces of this flanges must be matched.
If you are looking for class 900 flanges 2-1/2 or smaller, please refer to our class 1500 drawings. Per B16.5, they have the same dimensions. Texas Flange provides the following series of individual pages in HTML and PDF format that contain flange dimensions of the standard flanges we provide.
DN Pipe Flanges McMaster-CarrMetric Slip-On Weld Flanges. Front. Raised Surface on Back. For Use With:Air, Natural Gas, Oil, Steam, Water. Specifications Met:DIN 2633, DIN 86030, DIN EN 1092-1, DIN 2527. Pipe Nipples and Pipe:Use Schedule 40 steel. Fittings:Use Schedule 40 iron or steel.
EN1092-1 is also published in the British standards as BS-EN1092-1. Flange drillings in EN1092-1 are generally the same as BS4504 but EN1092-1 covers a wider range. EN1092-1 is for steel flanges, EN1092-2 is for Iron flanges, EN1092-3 is for Copper Alloy flanges, EN1092-4 is for Aluminium flanges. Regarding EN1092-2 Iron flanges, these
Flange Table ASME PN AS2129 4331 4087 ISO700501 EN 1092-1 is for steel flanges, EN 1092-2 is for iron flanges, EN 1092-3 is for alloy flanges, EN 1092-4 is for aluminium alloy flanges. PN stands for Nominal Pressure and roughly equates to the number of bar i.e. the cold working pressure of PN10 is 10 bar.