ASTM B111 B111m C12200 Dhp Tubes

ASTM B111 / B111M - 09 Standard Specification for Copper

C12200:DHP A:Phosphorized, high residual phosphorus:C14200:DPA A:Phosphorized, arsenical: ASTM B111 / B111M-09, Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock, ASTM International, West Conshohocken, PA, 2009,

ASTM B111 / B111M - 18 Standard Specification for Copper

C12200 . DHP A. Phosphorized, high residual phosphorus. C14200 . DPA A. Phosphorized, arsenical. ASTM B111 / B111M-18, Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock, ASTM International, West Conshohocken, PA, 2018, ASTM B111 ASME SB 111 SB 466 C71500 Copper Nickel ASTM B111 ASME SB 111 SB 466 C71500 Copper Nickel Tubes / 70/30 Copper Nickel Seamless Tubes Size:1 × 0.120 ASTM B111 is issued under the fixed designation B111/B111M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

ASTM B111 Standard Specification - Stainless Steel Tube

ASTM B111 is issued under the fixed designation B111/B111M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. C70600 . . . 90-10 Copper-Nickel ASTM B111M - 98e2 Standard Specification for Copper and A Designations listed in Classification B224.. Note 1--This specification is the metric companion to Specification B111. Note 2--Warning:Mercury is a definite health hazard in use and disposal.(See 12.1.) 1.2 The following safety hazards caveat pertains only to the test methods portion, Section 18, of this specification:This standard does not purport to address all of the safety concerns, if

Admiralty Brass Tubes ASTM B111 / ASME SB111 UNS

Inhibited Admiralty Brass tubes C44300 -has good corrosion resistance and is specially used for tubing of steam condensers cooled with fresh, salt or brackish water.Admiralty metal tubes are also used for heat exchangers in oil refineries, in which corrosion from sulfur compounds and contaminated water may be very severe, and for feed-water heaters and heat-exchanger equipment as well as DHP Copper tubes - ASTM B111 UNS C12200Copper Alloy Tubes. Phosphorus-Deoxidized copper tubes C12200 - are extensively used in sugar refineries for condensers and evaporators. Deoxidized copper is the standard material for transferring heat from steam to water or air because of their excellent resistance to corrosion by fresh water and their high thermal conductivities. UNS No.

SPECIFICATION FOR COPPER AND COPPER-ALLOY -

4.1.1 ASTM Designation and year of approval (for example, ASTM B111/B111M 04), 4.1.2 Copper or Copper Alloy UNS Designation (seeTable 1), 4.1.3 Form (tube or ferrule stock), 4.1.4 Temper (see Temper section), 4.1.5 Dimensions, outside diameter, and wall thickness, whether minimum or nominal (Dimensions and Permissible Variations Section), Standard Specication for Copper and Copper-Alloy 7.2 Tubes of Copper Alloy UNS Nos. C71500, C71520, and C71640 shall be supplied in one of the following tempers as specied:(1) annealed (O61) or (2) drawn, and stress-relieved (HR50). 7.3 Tubes of Copper Alloy UNS Nos. C10100, C10200, C10300, C10800, C12000, C12200, and C14200 shall be supplied in any one of the following tempers, one of which

ASTM B111 / B111M - 18a Standard Specification for Copper

C12200 . DHP A. Phosphorized, high residual phosphorus. C14200 . DPA A. Phosphorized, arsenical. ASTM B111 / B111M-18a, Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock, ASTM International, West Conshohocken, PA, 2018,