The heat exchanger plate features stainless steel 316L, stainless steel 304, and brazing material copper. It is used for transferring heat from one hot water source to another without mixing the two different water sourcesheating tap water with high-temperature hot water, low cost of cleaning, and environmental protection.
Tank:AISI 316L Stainless Steel. Heat Exchanger:AISI 316L Stainless Steel. External Casing:AISI 304 Stainless Steel. Mounting Brackets:AISI 304 Stainless Steel
Heat Exchanger Comparison of Tankless Water HeaterFor fighting corrosion, stainless steel cant be beaten. We have two recommendations on the matter, and both apply to condensing tankless heaters:1). If you buy a condensing gas tankless water heater, avoid models without stainless steel secondary heat exchangers. 2). If lower cost is your goal, copper primary heat exchangers or alloys are fine.
American Standard Shell& Tube Heat Exchanger, 316 Stainless Steel, Shell size is 14" x 3" Overall length is 16-1/2" not including fittings, Heat transfer surface area is 4.3 SqFt- Four tubeside passes, Tubeside flow is 12 GPM, Design pressure is 150 psi tubeside and 225 psi shell side, Maximum temperature is 450° F, Shell pipe size is 1" Tube pipe size is 3/4" Each quadrant of the shell has
STAINLESS STEEL WATER HEATERS AND STORAGE TANKStainless steel AISI 316L marine grade with higher resistance at stress to rupture and tensile strength at elevated temperatures PF 50:Coibentazione con materassino di poliuretano flessibile espanso, densità 18kg/m3 e spessore 50mm; rivestimento esterno in PVC
The 316l Stainless Steel Heat Exchanger is stronger and corrosion resistant than the 316 Stainless Steel Heat Exchanger but is less tough due to the lower carbon content. The 304 Stainless Steel Heat Exchanger is stronger but is less corrosion resistant than the 316 material made pipes.
Stainless Steel Heat ExchangersMar 02, 2021 · Thermokey stainless steel heat exchangers can be made with certified AISI 304 or AISI 316L tubes and casing. The finned pack of the stainless steel coil tubes can be in AISI 316L
AISI 316L stainless steel offers superior corrosion resistance, which is ideal for many lightly caustic applications like cooling plant nutrient solutions or chlorinated water. Helically wound tubes generate a rifling effect internally which adds to flow turbulence and greatly improves heat transfer
The Role Stainless Steel in Industrial Heat ExchangersHigh-rosin-acid streams can be han- dled by Type 316L with a minimum molybdenum con tent of 2.75%. Type 316 can also be used in the more corrosive high-fatty-acid streams at tempera- tures up to 475 (245 C), but Type 317 will probably be required at higher temperatures.