Shell Tube Condenser is also known as heat exchanger as it works for exchanging the heat from fluid. Two fluids at different temperature exchange heat with each other. Condenser is mainly used in industries like refineries, textile industries, solvent extraction plant, chemical plants etc.
Shell and Tube, High Efficiency, Marine, Heavy DutyShell and TubeCondenser, Water Cooled Shell and Tube - Condenser, Water Cooled - Refrigeration Equipment It
Shell and Tube Evaporators and Condensers from The tube sheet is welded to the shell. Cast end bonnets are bolted to the tube sheet. The number of passes is important as it controls the velocity of the fluid cooling the hot refrigerant. Refrigerant is piped to the shell circuit in this line of condensers so that the tube circuit can be mechanically cleaned using common cleaning devices such as brushes. Serviceable rolled tube, removable head design.
Shell and Tube heat exchangers are one of the most popular styles of heat exchanger devices used due to the various designs available. You will see these heat exchangers used in common application such as cooling hydraulic oil on a power unit, water glycol on engines, air or gases downstream of a compressor, condensing steam, vaporizing gases
Solved:A Water-cooled, Shell-and-tube Freon Condenser A water-cooled, shell-and-tube freon condenser with in-tube condensation will be designed to satisfy the following specifications:It is proposed that the following heat exchanger parameters are fixed:one tube pass with a shell diameter of 15.25 in. and pitch size is 1 in. with baffle spacing of 33 cm.
The warm refrigerant flows over water tubes and reject the heat to water and gets cooled. The condensed liquid refrigerant then leaves the condenser at bottom. In this arrangement the refrigerant tube also exposed to the air, and some quantity of heat will be rejected to ambient air. Shell and coil condenser - construction and working
WATER COOLED SHELL AND TUBE CONDENSERSprocess between tubes and tube sheets ensures excel - lent vibration stability and high safety in terms of tight - ness. New models The new models K6703.(B) and K8503.(B) in standard and seawater design extend the condenser capacity to the range above 1000 kW. Standard design for normal water The heat exchanger tubes are characterised by high
Shell:carbon steel , stainless steel . Tube sheet:stainless steel. Typical applications . 1.Process liquid or gas cooling. 2.Process or refrigerant vapor or steam condensing. 3.Process liquid, steam or refrigerant evaporation. 4.Process heat removal and preheating of feed water. 5.Thermal energy conservation efforts, heat recovery. 6
Carlyle P701 Water-Cooled Condenser - CarrierAvailable sizes range in capacity from 5 to 400 tons of heat rejection and are all shell-and-tube type condensers. Each can be custom-matched with compressors charged with your choice of Refrigerants. The P701 condensers serve as refrigerant
Proud to be serving the Machining Platform you can trust