LNG Peak Shaving and Gasification Station

(Process flow) LNG gasification station process flow chart

Jul 22, 2021 · For the peak shaving type LNG gasification station,In order to recover the residual gas from the unloading tanker during the non-peak shaving period and the BOG (Boil Off Gas) in the storage tank, or for the natural gas mixing station for uniform gas mixing, a BOG buffer tank is often added at the outlet of the BOG heater , And its capacity is set according to the remaining air volume of the recovery

LNG Facility Siting PHMSA

Peak-shaving Plants Natural gas shortages in the 1970s drove the construction peak-shaving plants. Natural gas usage demand fluctuates daily and seasonally. To ensure adequate supplies of natural gas when demand is at its peak, natural gas transmission pipeline operators and local distribution companies liquefy natural gas for storage when LNG Gasification Station, LNG storage tank. Unloading LNG is transported by LNG transport lorry to the gasification station and is storaged in the LNG tank. The liquid is self-boosted by the cryogenic pump, and then turned into natural gas through the vaporizer at atmospheric temperature. Through the pressure regulating and metering unit, natural gas will go into the pipeline network with some odorant.

LNG Satellite Station&Peak Gasification Station

LNG Satellite Station & Peak-Shaving Gasification Station LNG satellite station applies to small and medium towns where gas pipeline is difficult to reach. LNG, after pressurized and through air-temperature evaporator, turns into gas with temperature raising after heat exchange wit air, and enters into transmission and distribution pipeline after pressure regulating, measured, bromine adding.